Liqui Moly Engine Flush
Home > Liqui Moly > 4StrokeOil
Liqui Moly's Engine Flush is a cleaning fluid for clearing the engine interior of troublesome deposits by dissolving sludge and lacquer formers. With the Engine Flush additive all types of oil soluble and oil insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Flushes out and cleans the oil circuits of motorcycles with 4 stroke gasoline engines Intended for clearing the engine interior of troublesome deposits Dissolves sludge and lacquer formers Does not attack common sealing materials restoring the engine to its original performance The frequency of use is dependent on the degree of contamination of the oil circuit and on the quality of the oil used Tested for Catalytic converters Provides a long engine service life and is highly economical Motorbike Engine Flush is compatible with all commercially available motor oils Suitable for use on motorbikes with wet clutches One 250 ml can is sufficient for up to 4.5 liters of oil Note: Add Motorbike Engine Flush to the motor oil at running temperature before changing the oil. After adding the product; allow the engine to idle for approximately 10 minutes; then change the oil and the filter. Only $8.99 - Click here to buy now! |